Suzuki DR650 “Retro-Moto” by Parr Motorcycles

Suzuki DR650 Retromotard

Today, we are thrilled to feature the Suzuki DR650 “Retro-Moto” from Spencer Parr of Indiana’s Parr Motorcycles. Hailing from just outside Indianapolis, Spencer was a police officer on patrol for five years before he lost the sight in one eye due to ocular cancer. Now he works as an investigator during the day and builds motorcycles at night. For now, he is a one-man shop operating out of his home garage, but he hopes to expand one day.

Suzuki DR650 Retromotard

This Suzuki DR650 “retromotard” is an auspicious step, combining the powerful nostalgia of vintage Suzuki RM bodywork with modern suspension, supermoto wheels/tires, and streamlined electronics.  Believe it or not, Spencer’s first ride on the bike was to the The Reunion Motorcycle Show in Indianapolis, where the Retro-Moto won best in show in the “Made” category. Says Spencer:

“I hope one day I can have an impact on the motorcycle industry like all my favorite builders have. My wife told me, “just go for it”, so that’s precisely what I am going to do.”

We’re 110% behind you, Spencer! Keep building beauties like this and we’ll keep showcasing them!

Suzuki DR650 Retro Motard: In the Builder’s Words

Suzuki DR650 Retromotard

I’m 28 years old and I live just west of Indianapolis. Growing up I raced go karts and rode anything with a motor. I purchased my first motorcycle at age 18 (sportster 883). Many years and bikes later, I became obsessed with motorcycles. My motorcycles have ranged in styling from cruisers, dirt bikes, track bikes, café racers and so on. I started building motorcycles before college and started following Roland Sands who really inspired me.

Throughout college I continued to work on motorcycles getting my degree in criminal justice. Soon, I became a police officer and was on patrol for five years. Out of everything I had seen, nothing scared me more than early 2016. I was diagnosed with ocular cancer, which led me to be blind in one eye. When that happened, it made me realize how precious life is. I only have one life to live and want to do what makes me happy (building motorcycles). I get so much joy from bringing my vision to life through motorcycles. I work a desk job as an investigator during the day and build motorcycles at night. I am a one-man shop working out of my garage but hoping down the road I can be able to get my own spot with a couple more hands. I am excited to learn the craft more and more with every build. There is nothing like the motorcycle community and I am glad to be apart of it. I just started up on social media so be sure to follow me. Thank you very much!

Suzuki DR650 Retromotard

The following picture displays my 2003 Suzuki DR650 that I’ve named, “Retro-Moto.” I purchased the bike last November as a completely stock DR650 with less than 5k on the odometer. I looked at the bike, and I considered just putting some street tires on it and taking it on a ride; but I couldn’t stop there. I decided to start a challenging and rewarding project instead. That’s how the bike transformed into a full-frame up build.

Suzuki DR650 Retromotard

While I’m a guy who loves the looks, lines, and bold colors of Vintage Motorcycles, I also appreciate the performance of newer machines. With these things in mind I truly focused on showcasing the looks of a vintage Suzuki RM but established the performance of today’s machines in my “Retro-Moto.”

Suzuki DR650 Retromotard

When I tore down the bike, I got rid of unnecessary parts to lighten up the heavy DR650; these parts included the exhaust, airbox, and other miscellaneous parts. As I got down to the frame, I de-tabbed it and cut the rear section off. From there I welded mounts for my custom exhaust; then I angled and welded the frame loop to the rear section to make room for the rear-fender. I also made a pan to be mounted under the frame which holds all the electronics including the battery. This part of the process took some time; with the pan being mounted to the bottom of the frame, it only gave me about an inch to hold most of the electronics. Therefore, I integrated more room in the seat.

Suzuki DR650 Retromotard

After the frame was complete, I sent it out for powder coat along with other parts. The frame and swingarm were coated in a light grey, while the accent parts were blue and gold. The blue was tough to decide on because I wanted it to be bold and go with the vintage Suzuki yellow bodywork.

Suzuki DR650 Retromotard

After receiving the parts back from powder coat the fun really began. I rebuilt the front and rear suspension and upgraded it with Racetech suspension internals and springs. I finally was able to see the stance of the bike after outfitting it with Warp 9 Racing gold/blue wheels and Michelin Pilot Power tires. Warp 9 Racing fork brace (Blue), chain guide (Blue), and Apex floating rotors were also installed. The body work is from the late 70s Suzuki RM models which included: the number plate, fenders, and gas tank (79-80 Clarke); minus the handguards that are from a vintage Enduro.

Suzuki DR650 Retromotard

Since the bike had low mileage and was in excellent condition, I left the motor untouched. The exhaust is an FMF powerbomb header finished in stainless steel polished to match tailpipe. I made the tailpipe and had it run up the rear section of the frame and out the back. This was my first exhaust I’ve ever made, and I’m very pleased with the way it turned out (she is loud and proud!).

Suzuki DR650 Retromotard

The carburetor was upgraded to a DynoJet stage 1&2 kit (for the time being). I wanted the exhaust to stand out and be seen, so I removed the bottom section of the rear fender and made a small splash guard attached to the swingarm. I modified the original seat pan, so I could store some of the electronics (Battery, CDI); then added new foam, and wrapped it in blue vinyl. I worked through the wiring completely, replaced and rerouted things to fit in the minimal space that was available. Other added features were LED lights from front to rear for headlight/taillight and turn signals. The ignition uses a MotoGadget m.lock and the speedometer is a Trail Tech Vapor. The result is something I am proud of. It truly encompasses what I am all about in styling and performance.

Suzuki DR650 Retromotard

Fortunately, I got the bike built a day or two before The Reunion Motorcycle Show in Indianapolis back in June. My first ride on the bike was to the motorcycle show! After entering the bike in the show, it won the best in the “Made” category. After winning my category at The Reunion Motorcycle Show, I knew this is what I want to do with my life someday. Currently, I work as an investigator during the day and build bikes at night.

Suzuki DR650 Retromotard

Shout out to locals: Keith Carlson and Steve Hoy (Hoy Vintage Cycles & Powersports), who inspire me with their knowledge and motorcycle builds. I hope one day I can have an impact on the motorcycle industry like all my favorite builders have. My wife told me, “just go for it”, so that’s precisely what I am going to do.

Suzuki DR650 Retromotard

Bike Parts List
  • Wheels- Warp 9 Racing (17×3.50 Front/ 17×4.25 Rear) w/ Apex floating rotors
  • Tires- Michelin Pilot Power
  • Suspension- Racetech internals and rear spring
  • Battery- Antigravity 4 cell
  • Exhaust- FMF Powerbomb stainless header. I built the custom tailpipe.
  • Carb- Stock carb with Dynojet Stage 1 & 2
  • Warp 9 Racing- Fork Brace, Chain guide
  • JNS Engineering- Sprocket Cover, Oil Cooler Guard
  • Ignition- Motogadget M.lock
  • Speedo- Trail Tech Vapor
  • Gas Tank/Fenders- (79-80) Suzuki RM250/400 Clarke, 70’s Suzuki RM Fenders
  • Brake Lines- Spiegler

Follow the Builder

Facebook: Parr Motorcycles
Instagram: @parrmotorcycles

9 Comments

  1. Job well done Spenser!!! Glad to have had a very small part in this!! Was great to see you win a trophy at our local “The Reunion” Bike show!! Here is to many more builds. Indiana may be a boring state but we can put out some spectacular bikes!!!!!

    • Thank you Steve for helping me dial it in! You and Keith are truly inspiring, and I hope I can represent Indiana just like you guys!

  2. Very nice work, but I’ll be glad when this no-side-covers-see-through-the-frame fad is over.

  3. Shawn Harrington

    I don’t realky even like DRs. But, I want one of those! Very very nice!

  4. Shawn Harrington

    Could you do the same thing with an XL650?

  5. Moturcyclenut

    Great job, In hindsight Suzuki (or would that have been foresight?) They should have dusted off their crystal ball and built a bike like this. Then maybe Shawn H. wouldn’t be a DR hater. Come on Shawn laugh it off it is a nice DR, right? Sometimes you just have to go with the flow and build whatever it is that comes your way. Treasure your wife she’s a keeper. Not everybody is such an encourager. You have a talent, share your vision with the rest of us. Can’t wait to see what you come up with next.

  6. You did a great job .

  7. Thank you everyone for the encouragement! I’ve had so much fun on the DR and the response has been incredible. Soon, i’ll be building a bike of a similar platform that will be for sale, so we will see!

  8. Pingback: Ford Transit Connect Moto Van by Parr Motorcycles – BikeBound

Leave a Reply to Scott Bobst Cancel

Your email address will not be published. Required fields are marked *

*