Gatto Nero: Snowmobile-Powered Motorcycle by Jonz Customs

Snowmobile-Engined Motorcycle

There’s nothing quite like the furious brap-brap of a two-smoke’s throttle.  For many of us, a two-stroke dirt bike was our first introduction to a life on two wheels.  For a few, there is nothing in the saner world of four-stroke machinery to rival the banshee scream of a two-smoke hitting its powerband.  Hunter S. Thompson was one of these, a man scarred and awed by his experience riding the Kawasaki Triple:

“I still feel a shudder in my spine…when I walk into a public restroom and hear crippled men whispering about the terrifying Kawasaki Triple… I have visions of compound femur-fractures and large black men in white hospital suits holding me down on a gurney while a nurse called “Bess” sews the flaps of my scalp together with a stitching drill.”

But even the mighty Kawasaki Triple, Honda CR500, and other blue-breathed demons of nearly legendary status pale in comparison to the power offered by a modern two-stroke snowmobile engine.

Snowmobile-Engined Motorcycle

Snowmobile-Powered Motorcycle

Steve Jones of Jonz Customs in Sedalia, Colorado, decided to correct this oversight.  We first came across his build, Gatto Nero (“Black Cat”), at the Handbuilt Show in Austin earlier this year. What you see below is a custom-framed, snowmobile-engined motorcycle weighing just 320 pounds, powered by a 150-hp Arctic Cat F7 700cc two-stroke engine.

Snowmobile-Engined Motorcycle

That means this bike makes twice the horsepower of a Kawasaki 750 Triple, while weighing 125 pounds less! Nearly every component that orbits this powerplant is custom-built, from the trellis frame itself to the expansion chambers to the clutch and belt drive primary.

Below, Steve gives us the full story on the build.

Gatto Nero:  In the Builder’s Words

Snowmobile-Engined Motorcycle

(Words by Steve Jones. Highlights by us.)

This build is based on my love of all things 2-stroke. It features an Arctic Cat F7 fuel injected 2 stroke 700cc motor with a custom built 6 speed transmission. I built the trellis frame, expansion chamber, rear sets, air box, oil tank, dry clutch, belt drive primary, motor and tranny mounts and other bits as needed.

Arctic Cat-Powered Motorcycle

The tank is a modified Ducati 999 as is the fairing. The tail is a modified Yamaha R1 unit. Suspension is Ducati 999R front and modified S2r rear. Wheels are S2r. The transmission is an Aprilia RSV4 cassette housed in a billet case machined by Bob Schenck. Paint is by Hair Trigger in Englewood CO. Special thanks to Bart at Mad Moto for help with the wiring and making this bike run like the beast that it is. 150hp / 320 lbs. = FUN

Snowmobile-Engined Motorcycle

I’ve been building bikes far about 10 years now, doing about one per year. I don’t have customers for them, so they are all out of pocket. Not the best way to do things. It’s nice to have complete artistic freedom though. My builds cover quite a range of styles, from board track to sport bike. I prefer to build as many parts of a bike as possible to challenge myself in terms of both design and fabrication.

Snowmobile-Engined Motorcycle

Frames and exhaust are my favorite things to build. Not having large budgets for my builds helps to keep me creative. Probably my biggest brush with fame and fortune came a few years ago when Jay Leno did an interview segment with me and two of my bikes for his online version of Jay Leno’s Garage (photos here).

Snowmobile-Engined Motorcycle

I called the bike Gatto Nero because the Arctic Cat logo features a black cat.

-Steve Jones / Jonz Customs:  303-437-9901 /

Snowmobile-Engined Motorcycle




  1. there is nothing like the smell of premix oil burned at dawn
    I would kill for that bike
    2strokes forever

  2. That’s an amazing piece of engineering!
    So… It’s a pull start, isn’t it?
    [Please try not to drop in on the right side primary drive unit] ;o)

  3. Drooling with a smile, I’d pay good money just to hear it ran through it’s gears.

  4. James Boyer

    Hello sir! Amazing… I’ve been wanting to do what you are doing for years just cause I have always thought it would be cool as shit. Are any of your bikes for sale??

    • Steve Jones

      Thanks for the kind words. This bike is for sale as well as some of my others. Haven’t ever put a price on it though.

  5. I am about to dive in on the deep end of the pool on a similar build. I was going in the direction of a crap bike with a large cc 2 stroke snowmobile motor very soon. Upon seeing what you have done has me thinking of ditching the straight line platform and doing what you have done. Seeing as there is your contact info in the article you are about to be my new BFF! I’ve built many custom Harley’s, lots of RD350-400’s and was a welder/fabricator for 25 years before I had a bad crash in 2013 where I was dead at the scene then 4 more times while in a coma over a two week period. I had 9 surgeries on my legs before I ever woke up. Against the odds I pulled through and haven’t stopped since. They said I’d never walk again but in 10 months I was riding my Harley down the hwy. still couldn’t walk. I would slide out of my wheelchair onto the seat of my streetglide and off I’d go. After a few months I learned how to walk even though the doctors told my family I would never walk again. They didn’t know me so I let them slide. As if that wasn’t enough a lady slammed into my on my club style Dyna and I flew over the back corner of her car and went face and chest first into the street at about 25 mph breaking my back. I’m still going but can no longer work at my profession. To keep myself from dying of bordom I tinker. I have a MIG and a TIG, plasma cutter and a bunch of fabrication tools. Enough to be dangerous and I’ve never lost the need to go as fast as I can on anything I ride or drive. When most are too scared to push any harder that’s about where I begin to have fun. My name is Ricky I’ll be calling on you very soon

Leave a Reply to James Boyer Cancel

Your email address will not be published. Required fields are marked *